1/4″ Neutrik XLR Male – Jack Microphone Cable Klotz


Klotz MY206 microphone cable connected with Neutrik Jack NP3X –  XLR NC3MXX

6 in stock

Enter Required Length (0.15-30m)
SKU: KlotzMY206d Categories: , Brand:


Microphone Cable Neutrik NP3X – NC3MXX

The MY206 microphone XLR cable was developed by Klotz specifically for the daily demands of stage and studio.  The rubberised PVC outer coat is designed to ensure flexible handling, resistance to temperature extremes.  The inner padding gives the cable a consistent capacitance across its length, and reduces handling noise.  Spiral copper shield provides excellent shielding against external interference.

Example applications:

  • Mixer out to powered speaker input
  • Mixer to amp input
  • Power amp link cable
  • FX Rack patch cable
  • Mic/line balanced interconnect
  • DJ mixer booth output to active speaker (not a passive speaker)

Note:  Contact Cable For Musicians if you are unsure.  ONLY FOR USE WITH MIC/LINE SIGNALS.  NEVER USE FOR INPUT TO A PASSIVE SPEAKER Link to passive speaker cables here

Pin out:

Pin 1 XLR – Sleeve Jack (Sleeve)
Pin 2 XLR – Tip Jack (Hot)
Pin 3 XLR – Ring Jack (Cold)


Ultra-low capacitance (60 pF/m)
Extremely good handling
Specification KLOTZ Mic Cable MY206
Conductor: stranded bare copper, 28 x 0.10 mm
Cross Section: 0.22 mm2
Insulation: PE
Core Arrangement: 2 cores + cotton tracers, twisted
Shielding: bare copper spiral shield
Outer Jacket: PVC, matt
Overall Diameter: 6.15mm
Min Radius: 30mm
Working Temperature: -20C / +70C
Conductor Resistance: 85 ohm/km
Cond/Cond. 60 pF/m
Cond/Shield 110 pF/m
Insulation Resistance: > 100 Mohm x km


Additional information

Cable Length

3m, 6m, 9m


There are no reviews yet.

Be the first to review “1/4″ Neutrik XLR Male – Jack Microphone Cable Klotz”